Motorola V300 - V300 Display

V300 display
l Show the camera status on the display
l Step through the status sequence:
o
Press the Backlight button a second time, while backlight is on, to start the display of the
status sequence
o
Press the Backlight button while in status sequence, to advance to the next item in the
sequence (At end of sequence, it starts over)
o
End the sequence of status information on the display
n The Backlight turns off about 8 seconds after going through all of the info screens
n The Record button interrupts the status sequence
l Mute the audio momentarily (page 26)
l Toggle event tags when categorizing events
V300 display
The display on the V300 shows icons and messages to indicate the status of the camera. The
icons show in the top half of the display. The messages show in the 8-character area on the
bottom half of the display. If a message is longer than 8 characters, the message scrolls. The
display is on the top of the camera.
The display informs you of:
l Status LED
Lets you know immediately if you are recording.
l Battery status
As the charge level decreases, the number of bars in the Battery Charge icon decreases.
l Current recording length
The recorded event length shows as HH:MM:SS, for example, 1:23:59, and includes any
configured pre-event time.
l Date and time
The date shows as an abbreviation for the month with a 1- or 2-digit day of the month, for example,
NOV 3.
l Event categories
Each category shows as you cycle through the list, for example, Domestic. If the item is longer
than the window screen, the item scrolls. The list of categories is configured in Evidence Library
(EL).
l Number of recorded events in storage
l Officer name
l Recording status
The REC icon (lREC) shows even if the camera is not recording.
l Saved storage total
The saved storage total shows as a decimal value in GB, for example, 11.07 GB.
V300 Body-Worn Camera User Guide
WGD00169 Revision C
55