Getting Started
Pre-Event and Record After The
Fact® (RATF) Overview
Pre-Event Capture lets you add up to two minutes of video before a recorded event. RATF lets
you continuously capture and save video. You may want to capture part of an event that was not
recorded as part of the original recorded event. Because the V300 Camera continuously records,
you can capture that part of the event. When either Pre-Event or RATF are enabled, the camera
continuously captures and saves video when it is powered on. You enable both in Evidence
Library (EL). See the Evidence Library Online Help for more information.
See Using Pre-Event and Record After the Fact® (RATF) on page 41
28
V300 Body-Worn Camera User Guide
WGD00169 Revision C
To Next Page
Loading...
