About the Features of the V300 Camera
Transfer Station II and WiFi base
LEDs
The LEDs in the WiFi base brightness depends on the time of day. The display dims from 8 pm to
8 am.
Power LED indicators
Use Case Transfer Station II WiFi base
Powered on standby Power LED green solid Power LED green solid
Camera/Battery docked,
charging
Power LED green blinks until
100% charged
Power LED green blinks until
100% charged
Camera/Battery docked,
finished charging
Power LED green solid Power LED green solid
Camera/Battery docked,
charge error
Power LED red solid Power LED red blinks
Associate success N/A Power LED green blinks
3 times
Associate error N/A Power LED red blinks
3 times
Error N/A Power LED red blinks 1 second
on, 1 sec off
Base shutdown N/A Power LED green blinks until off
Base firmware upgrade N/A Power LED amber blinks 250
milliseconds (ms) on, 250 ms off
Base firmware upgrade
Pending
N/A Power LED amber blinks 500 ms
on, 500 ms off
SPS firmware upgrade
staged
N/A Power LED amber blinks 1 sec on,
1 sec off
SPS firmware upgrade
pending
N/A Power LED amber off
68
V300 Body-Worn Camera User Guide
WGD00169 Revision C
To Next Page
Loading...
