Upgrading V300 Firmware
Upgrading V300 Firmware
You can push new firmware upgrades to the V300 Camera while it is docked in the Transfer
Station II. You can push an upgrade automatically when it is docked (depending on your
configuration).
Important! Do not remove the battery while the upgrade is in progress.
l WiFi base
You can push an upgrade to the V300 when it is docked in a WiFi base, only if the WiFi base has
access to Evidence Library (EL) upload server. The upgrade is pushed automatically.
When an upgrade is pushed to the camera, the firmware is first staged on the camera, then the
upgrade is applied.
V300 Body-Worn Camera User Guide
WGD00169 Revision C
37
To Next Page
Loading...
