Motorola V300 - Starting and Stopping a Recorded Event; Starting a Recorded Event Manually

Getting Started
Starting and Stopping a Recorded
Event
Use the Record Start/Stop button on the front of the camera to start or stop a recorded event.
If your Motorola Solutions V300 is a member of a recording group, the camera can start or stop a
recorded event automatically. Another group member can alert that it has started or stopped an
event (page 45).
Both LEDs on the camera are red when recording, except when in Covert Mode. In Covert Mode,
they are both off. When stopped, the Status (top) LED is green and the front LED is off.
1 Status LED
2 Recording LED
3 Record Stop/Start
Starting a recorded event manually
To manually start a recorded event on the V300 press the Record Start/Stop button.
The display shows RECORDING. The dot above REC in the display begins to blink and shows
the recording length. The camera LEDs appear solid red.
As the recorded event continues, the display shows the length increasing every second and the
storage indicators updating.
24
V300 Body-Worn Camera User Guide
WGD00169 Revision C