Smart Power Switch (SPS)
Tip: If the 4RE DVR or V300 Cameras are members of the same recording group,
4RE can initiate group event starts, stops, and categorization and V300 can join in
on the group actions depending on the EL configuration.
Important! If a V300 moves out of range of its associated recording group network,
it does not receive notifications of group recording starts and stops until it is back in
range.
V300 provides a wireless access point (hotspot) for the SmartControl smartphone application. For
information about connecting the SmartControl application, See SmartControl on page 71.
Smart Power Switch (SPS)
As part of the local recording group network, the SPS:
l Functions as the central connection point for a recording group
Through the switch, the devices connect together to form a network, letting the 4RE DVR and/or
V300 Camera group members communicate with each other.
l Intelligently manages power within the local recording group network
The SPS can detect the status of the devices in the network, whether they are powered on or have
powered themselves off after finishing event upload or charging. When the switch detects that the
devices in the local recording group network no longer need power, it shuts down any remaining
devices connected to the local network, including itself.
l Functions as the local network DHCP server for the local recording group network and other
devices connected to it (for example, wireless radio)
The SPS is required to form a recording group. There can only be one Smart Power Switch in a
recording group.
V300 Body-Worn Camera User Guide
WGD00169 Revision C
47
To Next Page
Loading...
