6881039B25 January 08, 2002 27
Level III Service Manual Disassembly
2. Using the disassembly tool, gently lift the keypad PCB assembly out of its
socket on the transceiver board assembly as shown in Figure 14.
3. To replace, align the Keypad PCB assembly with its socket on the transceiver
board.
4. Gently press the keypad PCB assembly onto the transceiver board assembly
until it snaps into place.
5. Replace the transceiver board, rear transceiver housing, rear housing cover,
SIM, battery, and battery cover as described in the procedures.
011104-o
Figure 14. Removing Keypad PCB Assembly
KEYBPAD PCB
DISSASSEMBLY TOOL
TRANSCEIVER BOARD
To Next Page
Loading...
