CHAPTER
31
5 MOTU Audio Console
OVERVIEW
MOTU Audio Console gives you access to basic
4pre hardware settings, such as sample rate, clock
source and more.
Accessing the 4pre settings. . . . . . . . . . . . . . . . . . . . . . . . . . 31
‘General’ tab Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Sample Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Master Clock Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Samples Per Buffer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Use stereo pairs for Windows audio. . . . . . . . . . . . . . . . . . 34
Use WaveRT for Windows audio . . . . . . . . . . . . . . . . . . . . . 34
Enable Pedal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
‘4pre’ tab settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Phones Assign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ACCESSING THE 4PRE SETTINGS
There are several ways to access 4pre settings:
■ Open MOTU Audio Console from the Windows
Start menu > Programs > MOTU.
■ From within your host audio software’s audio
driver preferences. For example, in Cubase or
Nuendo, open the Device Setup window, click VST
Audio System and choose MOTU Audio ASIO from
the ASIO Driver menu. Then click the MOTU
Audio ASIO item in the list and click the Control
Panel button.
☛ Most applications provide access only to basic
settings such as sample rate and clock source. For
access to all settings, open MOTU Audio Console
using one of the techniques above.
General tab settings
The General tab (Figure 5-1) provides settings that
apply to all connected MOTU FireWire and USB
audio interfaces.
4pre tab settings
The 4pre tab (Figure 5-1) provides settings that
apply to a specific 4pre interface. If you have several
4pre interfaces connected (or other MOTU
interfaces), you’ll see a separate tab for each one.
To Next Page
