Need help?Do you have a question about the MOTU 4pre and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Phantom Power | Yes |
| A/D Resolution | 24-bit |
| Analog Inputs | 4 x XLR/TRS Combo, 2 x 1/4" TRS |
| MIDI I/O | Yes |
| Mic Inputs | 4 x XLR/TRS Combo |
| Line Inputs | 4 x 1/4" TRS |
| Line Outputs | 2 x 1/4" TRS |
| Headphone Outputs | 1 x 1/4" |
| Sample Rate | Up to 96 kHz |
| Connectivity | FireWire |
| Analog Outputs | 4 |
Details the procedure for installing the 4pre software.
Instructions on how to launch and use the MOTU Audio Installer.
Crucial precautions to take before connecting the 4pre hardware.
Step-by-step instructions for connecting the 4pre via FireWire or USB.
Guide on making analog and digital audio connections to the 4pre.
Explains the different power sources available for the 4pre.
Using the front panel knobs to control mixes and input levels.
How to launch and use MOTU Audio Console for configuration.
Guide to selecting the appropriate MOTU Audio driver for your system.
Tips and techniques for minimizing latency when using host software.
Methods for monitoring live audio inputs with the 4pre.
How to adjust the buffer size to reduce monitoring delay.
Utilizing the 4pre's built-in CueMix mixer for zero-latency monitoring.
Using the CueMix FX application for managing monitor mixes.
Detailed procedure for syncing the 4pre and host software to SMPTE.
Common issues with the 4pre dropping offline or not being recognized by the computer.
Problems with 4pre visibility, authentication, or direct time code syncing in Cubase.
Troubleshooting clicks, pops, or other audio issues related to hard drive performance.
Information on registering, technical support, and disc replacement.
To Next Page
