EasyManua.ls Logo

Movado BOLD Evolution Day Date - 3-Hand Automatic Models with Day;Date Display; Includes Movado Heritage Series Datron Day;Date

Movado BOLD Evolution Day Date
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
4
3-HAND AUTOMATIC MODELS WITH DAY/DATE DISPLAY
Includes Movado Heritage Series Datron Day/Date
S
W
I
S
S
M
A
D
E
28
AUTOMATIC
1 2 3
M
S
D
H
W
LEGEND:
H – Hour hand
M – Minute hand
S – Seconds hand
W – Day Window
D – Date Window
1, 2, 3 – Crown positions
Crown positions:
Position 1 – Normal running position.
Crown pushed into case.
Position 2 – To set DATE:
Rotate crown clockwise.
To set DAY:
Rotate crown counterclockwise.
Position 3 – To set TIME:
Rotate crown in either direction.
* IMPORTANT: Do not adjust the Day or Date
between the hours of 9:00 PM and 4:00
AM when automatic calendar changes are
in progress, or the Day and Date may not
change properly on the following day.
* NOTE: If your watch has a screw-down crown,
before you can set the Date (Day/Date)
or Time, you must first unlock the crown by
turning it counterclockwise approximately
six rotations. After Time/Date (Day/ Date)
setting, the crown must be screwed back down
into the case to ensure water resistance.
To manually wind an automatic movement:
The motion of your arm during normal
daily activities should be sufficient to keep
the movement of your Movado automatic
timepiece wound. However, if you have not
worn your watch for 38 hours or more, and the
watch has stopped, you will need to wind it by
hand before setting the time:
1. With the crown in position 1, turn the crown
clockwise approximately 20 revolutions.
2. Reset time following instructions above.
FIGURE A

Related product manuals