33
SPECIAL FEATURES
C
ROTATING REFLECTOR RING
Select Movado BOLD models feature a rotating reflector ring for measuring elapsed time. Located under
the crystal and controlled by a screw-down crown at 2 o’clock, the reflector ring can be used to monitor
the number of minutes that have elapsed on a timed excursion – for example, since you put money in a
parking meter:
1. Unlock the screw-down reflector ring crown by pressing on it gently while turning it counterclockwise
approximately six rotations until it pops out.
2. Turn the crown in either direction to align the reflector ring’s arrow marker with the current position of
the minute hand on the watch dial.
3. Screw the reflector ring crown back down into the case by turning clockwise while gently pressing in on it
until you feel resistance. Do not over-tighten.
4. As the minute hand advances around the dial, the number it points to on the reflector ring indicates how
many minutes (1 to 59) have passed since you began the timing.
5. When not in use, realign the reflector ring arrow at 12 o’clock, being sure to screw the reflector ring
crown back down into the case to assure water resistance.
To Next Page
Loading...
