35
SPECIAL FEATURES
E
MESH BRACELET SIZING
The mesh bracelets found on select models feature a hooking
jewelry clasp that allows you to size the bracelet by sliding
the pin-bar half of the clasp along the bracelet to achieve a
customized fit.
Above: Open mesh bracelet side with pin-bar half of sliding
clasp locked in position.
To size the bracelet:
1. Use tool such as a small flat-head screwdriver to pop open
metal plate on pin-bar half of clasp, releasing the clasp position
locking mechanism.
2. Slide pin-bar half of clasp along the mesh bracelet in either
direction to desired position.
3. Close metal plate, locking the pin-bar half of the clasp in new
position on the bracelet.
1. Normal Position
Slide Buckle Adjustments
2. Pull the metal plate with tools
3. Move the slide buckle to the correct position
4. Close the metal plate
1. Normal Position
Slide Buckle Adjustments
2. Pull the metal plate with tools
3. Move the slide buckle to the correct position
4. Close the metal plate
1. Normal Position
Slide Buckle Adjustments
2. Pull the metal plate with tools
3. Move the slide buckle to the correct position
4. Close the metal plate
1. Normal Position
Slide Buckle Adjustments
2. Pull the metal plate with tools
3. Move the slide buckle to the correct position
4. Close the metal plate
To Next Page
Loading...
