Movado BOLD Evolution Day Date - Page 27

27
error, the chronograph hands can be realigned
to zero if needed. A single push (quick press and
release) will advance hands by one increment. To
advance hands rapidly, depress and hold push
buttons for longer than one second.
Crown position 2:
Adjust minutes-counter hand E using button B.
Crown position 3:
Adjust chronograph seconds hand C using button
A.
Adjust tenths-of-a-second hand G using button B.
OPERATING THE CHRONOGRAPH
Simple chronograph functions:
1. Press button A to start chronograph.
2. Press button A a second time to stop
chronograph; read time.
3. Press button B to reset chronograph to zero.
Accumulated time functions:
1. Press button A to start chronograph.
2. Press button A a second time to stop
chronograph.
3. Press button A again to resume measurement.
4. Press button A a fourth time to stop chronograph
again.
NOTE: Each time you stop chronograph,
chronograph hands will indicate total accumulated
time.
5. Repeat steps 1 and 2 to add each additional
interval of time.
6. After you have taken your final accumulated
time reading, press button B to reset
chronograph hands to zero.
Split-time or intermediate time functions:
You can take intermediate time readings as a race
progresses with these models:
1. Press button A to start chronograph.
2. Press button B to momentarily stop chronograph.
3. Read off the intermediate time, for example: 10
minutes, 26 seconds, 3/10 of a second.
4. Press button B to resume chronograph function.
Hands will catch up with ongoing event.
5. To read a second split time, press button B again.
Repeat steps 2 through 4 to take any additional
split times.
6. Press button A to stop chronograph.
7. Take a reading of the final time, for example:
27 minutes, 3 seconds, 7/10 seconds.
8. Press button B to reset chronograph hands to
zero.
11
QUARTZ CHRONOGRAPH
110 OF A SECOND  TYPE D
Select 38 mm Movado BOLD Quartz chronographs