2
8. Use the Robotic Mower for lawn mowing only.
9. Keep all guards, shields, safety devices, and sensors in place. Repair or replace damaged parts, including
warning labels.
Transportation
To safely move from or within the working area:
1. Press the red STOP button to stop the Robotic Mower.
2. Ensure that the main power switch is selected to OFF position before you lift up your Robotic Mower.
3. Close the top covers, and carry the Robotic Mower on the rear handle, the blade disc must be directed away from
your body.
IMPORTANT! It is recommended to keep the original packaging for shipping purposes.
IMPORTANT! After turning on the Robotic Mower, always re-set the current day and time, otherwise unexpected
operation of the Robotic Mower may occur.
Maintenance and Special Instructions
1. Always switch off the main power switch of the Robotic Mower before clearing blockages/ checking/ cleaning/
working on it or replacing the blades. Never attempt to service or adjust the Robotic Mower while it is in operation.
2. In case of abnormal vibrations, stop the mower, switch off the main power switch and check for any damage to
the blades. Replace worn or damaged blades to preserve balance. If vibration continues, contact a service
centre.
3. Use thick / heavy gloves when inspecting or servicing the blades.
4. Do not perform maintenance when barefoot or wearing open sandals. Always wear suitable work shoes and long
trousers;
5. Replace worn or damaged parts for your safety.
6. Use only original parts and accessories. It is not permitted to modify the original design of the Robotic Mower. All
modifications are made at your own risk and void the warranty.
7. Keep all nuts, bolts and screws tight to be sure the machine is in safe working condition.
8.
Warning! When there is a risk of a lightning, disconnect the perimeter wire from the base station, and unplug
the transformer plug from the power source.
Batteries
1. Do not open or damage the battery pack.
2. The battery pack should be replaced only by a service dealer.
3. The battery pack contains electrolytes. In case of an electrolyte leakage from the battery pack, the following
actions must be taken:
- Skin contact: Wash off the contact areas with water and soap immediately.
- Eye contact: Flush the eyes with plenty of clean water immediately for at least 15 minutes, without rubbing.
- Seek medical advice immediately.
4. Ensure that the battery pack is charged using the correct charger recommended by the manufacturer. Incorrect
use may result in electric shock, overheating or leakage of corrosive liquid from the battery.
Charger
1. The socket-outlet should be installed near the charger station and should be easily accessible.
2. This transformer is short-circuit proof and safety-isolated.
3. The external flexible cable or cord of this unit cannot be replaced; if the cord is damaged, the unit must be
exchanged completely.
4. Do not open the charger, to avoid electrical shock. Only qualified service personnel should repair the charger.
5. Protect the charger from humidity.
To Next Page
Loading...