3
6. Disconnect the equipment from the power supply before cleaning. Do not use any liquid or aerosol cleaner.
7. The charger should be placed on a stable surface. A drop may cause damage.
8. If the equipment is not used for a long time, disconnect it from the power supply to avoid damages from voltage
peaks or lightning strikes.
9. If one of the following situations occurs, the equipment must be checked by a qualified service personnel
- Plug is damaged.
- Liquid has penetrated into the equipment.
- Equipment has been exposed to humidity.
- Equipment has been dropped and/or is damaged.
- Equipment has obvious signs of breakage.
- Equipment does not work well or you cannot get it working according to this manual.
10. The fuse of the product cannot be replaced.
Product end of lifetime
1. The Robotic Mower and its accessories must be properly recycled at the end of its lifecycle to protect the
environment.
2. Do not dispose of the Robotic Mower or any other part of it (including the charger, battery & base station) as
unsorted municipal waste.
3. Ask your local dealer about recycling.
4. Do not throw the battery pack in a fire.
1.2 The Robotic Mower safety features
1. Anti-theft/ disabling device
The Anti-theft/ disabling device system function will prevent anyone from using or operating the Robotic Mower
unless they have the valid code. You will be prompted to enter a four-digit code of your choice to use as your
personal security code.
2. Lift sensor
In case the Robotic Mower is lifted during blade operation to more than 20°, the blade will immediately stop
rotating.
3. Tilt sensor
In case the Robotic Mower is tilted up from any side towards a vertical position, the blade will stop immediately.
4. Obstruction sensor
The Robotic Mower detects obstacles in its way during operation. If the Robotic Mower collides with an obstacle,
the Robotic Mower will stop movement in that direction and reverse away from the obstacle.
5. Emergency stop button
Pressing the STOP button will stop the Robotic Mower and the blade immediately.
6. Main power switch
Switching off the main power switch turns off any operation. Switch off before lifting the Robotic Mower and for
completing any maintenance.
7. Sealed battery
The battery that operates the Robotic Mower is completely sealed and will not leak any type of fluids, regardless
of its position.
8. Base station/ perimeter switch and perimeter wire
The Robotic Mower cannot operate without a perimeter wire installed and activated through the base station. If
the perimeter wire is not connected correctly or is damaged, the Robotic Mower will stop operating.
To Next Page
Loading...