12
Fig.12
Paths, Driveways and Roads
Exclude elevated pavements with a boundary wire loop. Place the wire around 20-30 cm away (Fig.13).
Fig.13
Even pavements don’t need to be excluded. The Robotic Mower can drive over. The boundary wire is allowed to
cross the pavement. Beware of loose loops in the wire. The Robotic Mower may cut the wire (Fig.14).
Fig.14
4.4. Charging station
Firstly, locate the best position for your charging station, consider the nearest
outdoor
electricity socket as this
needs to be plugged in (or your Robotic Mower won’t work).
Please make sure it is flat, dry, without magnetic
fields and without obstacles in the front of charging station
(Fig.15)
.
Fig.15
The charging station should be have at least 2 meter space in front to make sure the Robotic Mower can
smoothly return to the base station. (Fig.16A) Choose a shadowy spot as the battery prefers to be recharged in a
cool place.
When starting to peg the wire, first leave about 1 meter extra wire for potential adjustment, peg the wire along the
boundary. When finishing laying out, do not leave the wire box or extra wire loop on the boundary wire, leave
another 1 meter extra wire and then cut the boundary wire. (Fig.16B/Fig.16C)
working area
To Next Page
Loading...