Chipset Configuration
This screen allows you to configure the chipset settings.
Power ON after Power Fail
This setting allows you to configure whether or not the computer automatically powers up after a system crash.
When set to ON, the computer will automatically power up after a system crash; when set to OFF, it won’t
automatically power up after a system crash.
Options: ON (default), OFF, Last State
Power Button
This setting allows you to enable or disable the power button. If the power button is enabled, you can press the
power button to power on or power off the computer. If the power button is disabled, you need to press the
power button for more than four seconds to power off the computer.
Options: Enabled (default), Disabled
DO-0 Level
This setting allows you set the DO-0 as high or low.
Options: High (default), Low
DO-1 Level
This setting allows you set the DO-1 as high or low.
Options: High (default), Low.
To Next Page
Loading...
Need help?
General