USB Boot
This setting allows you to enable or disable the USB boot function.
Options: Enabled (default), Disabled
EFI Device First
This setting allows you to determine the booting priority of the EFI device. If this setting is enabled, the EFI
device will boot first; if disabled, the legacy device will boot first.
Options: Disabled (default), Enabled
Boot Delay Time
This setting allows you to configure the delay time to enter a hot key during POST.
Options: 0 Second (default), 3 Seconds, 5 Seconds, 10 Seconds
Legacy
Normal Boot Menu
This setting allows you to configure the boot menu.
Options: Normal (default), Advance
Boot Type Order
This setting allows you to configure the boot order. To change the boot order, press the “-” or “F5” key to an
item move down the list, and the “+” or “F6” key to move up.
Options: Hard Disk Drive (default), CD/DVD-ROM Drive, USB, Others
To Next Page
Loading...