V2406A Hardware Introduction
2 auto-sensing 10/100/1000 Mbps ports (M12 X-coded)
4 RS-232/422/485 ports, software selectable (DB9 male)
Serial Communication Parameters
None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
50 bps to 921.6 kbps (non-standard baudrates supported; see user’s manual for details)
-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
-422: TxD+, TxD-, RxD+, RxD-, GND
-485-4w: TxD+, TxD-, RxD+, RxD-, GND
-485-2w: Data+, Data-, GND
Digital Input Levels for Dry Contacts:
• Logic level 0: Close to GND
Digital Input Levels for Wet Contacts:
• Logic level 1: +10 V to +30 V (Source to DI)
-state Voltage: 24 VDC nominal, open collector to 30 VDC
10-pin screw-fastened Euroblock terminal (6 inputs, 2 outputs, DI Source, GND)
2 per port (10/100/1000 Mbps)
For warm reboot (front panel)
Without ears: 250 x 57 x 154 mm (9.84 x 2.23 x 6.06 in)
With ears: 275 x 63 x 154 mm (10.83 x 2.47 x 6.06 in)
-25 to 55°C (-13 to 131°F)
-40 to 70°C (-40 to 158°F)
-40 to 85°C (-40 to 185°F)