moyno 2000 User Manual

MOYNO
®
2000 Pumps
G1 Flanged Models
SERVICE MANUAL

moyno 2000 Specifications

General

Brand	moyno
Model	2000
Category	Water Pump
Language	English

Summary

Introduction and Pump Identification

General Pump Overview

Installation Procedures

General Installation and Piping Guidelines

Foundation and Shaft Alignment

Pump Operation

Initial Checks and Start-Up Procedure

Checklist of pre-operation checks and step-by-step procedure for pump start-up.

Packing Leakage and Adjustment

Maintenance Procedures

Packing Replacement and Lubrication

Pump Disassembly and Component Removal

Procedures for pump disassembly, including disconnect, packing, stator, and shaft removal.

Component Inspection and Cleaning

Procedures for inspecting bearings, drive shaft, rotor, stator, and other parts for wear and cleaning.

Pump Assembly and Lubrication Steps

Detailed steps for assembling pump components and proper lubrication during assembly.

Specific Assembly Procedures

Rotor/Stator and Drive End Assembly

Procedures for assembling rotor/stator into the pump and connecting to the drive end.

Gear Joint Assembly and Stator Support

Steps for assembling gear joints and attaching the stator support/discharge assembly.

Final Assembly and Short-Term Storage

Comprehensive Parts Lists

Main Parts List and Drive End Components

Parts by Type Designation (CD, CS, SS)

Stator, Flange, and Rotor Parts Listing

Head Ring and Shaft Sleeve Parts

Special Options and Troubleshooting

Flush Gland Option: Installation and Operation

Standard Hardware and Troubleshooting Guide

Lists standard hardware and provides a comprehensive troubleshooting guide for pump problems.