MSA fieldserver EZ Series - Creating Device EZ Profiles

7.3 Creating Device EZ Profiles
• Open the Device Profiles page to create a new profile.
• Create a data map using one of two methods:
◦ Create Modbus to BACnet mapping using the Web Interface (Section 7.3.1 Using the Device Web Interface to
Map BACnet Objects)
◦ Create Modbus to BACnet mapping using Excel Profile Generator (Section 7.3.2 Using Excel Profile Generator
to Map BACnet Objects)
• After saving the data map, complete the profile setup by updating State Tables and Notification Classes as needed.
(Section 7.3.3 Completing Device Profile Setup)
20 EZ Gateway Modbus to BACnet Start-up Guide