MSA fieldserver EZ Series - Login to the Fieldserver Manager

To Next Page

To Previous Page

9.4 Login to the FieldServer Manager

After the gateway is registered, go to www.smccloud.net and type in the appropriate login information as per registration

credentials.

NOTE:If the login password is lost, see the MSA Grid - FieldServer Manager Start-up Guide for recovery

instructions.

EZ Gateway Modbus to BACnet Start-up Guide 43

Main Page

Table of Contents3
About the EZ Gateway5
Certification5
Supplied Equipment5
Equipment Setup6
Mounting6
Physical Dimensions7
Installation8
DIP Switch Settings8
Bias Resistors8
Termination Resistor9
Connecting the R1 & R2 Ports10
Wiring10
Supported RS-485 Baud Rates by Protocol10
10/100 Ethernet Connection Port11
Power up the Gateway12
Connect the PC to the Gateway13
Connecting to the Gateway Via Ethernet13
Changing the Subnet of the Connected PC13
Navigate to the Login Page13
Setup Web Server Security14
Login to the Fieldserver14
Select the Security Mode16
HTTPS with Own Trusted TLS Certificate17
HTTPS with Default Untrusted Self-Signed TLS Certificate or HTTP with Built-In Payload Encryption17
Configuring the EZ Gateway18
Controls, Status and Log Functions18
Setting up the Connections19
Creating Device EZ Profiles20
Using the Device Web Interface to Map Bacnet Objects21
Using Excel Profile Generator to Map Bacnet Objects23
Completing Device Profile Setup24
Export Profile for Backup or Future Use25
Importing a Device Profile26
Mapping Bacnet Output with Device EZ Profiles27
Test and Commission the EZ Gateway28
Accessing the Fieldserver Manager28
Bacnet Explorer29
Discover the Device List30
View Device Details and Explore Points/Parameters31
Edit the Present Value Field34
MSA Grid - Fieldsever Manager Setup36
Choose Whether to Integrate the Fieldserver Manager36
User Setup37
Registration Process39
Login to the Fieldserver Manager43
Troubleshooting45
Communicating with the EZ Gateway over the Network45
Taking a Fieldserver Diagnostic Capture46
LED Functions47
Factory Reset Instructions48
Internet Browser Software Support48
Additional Information49
Change Web Server Security Settings after Initial Setup49
Change Security Mode50
Edit the Certificate Loaded Onto the Fieldserver51
Change User Management Settings52
Create Users53
Edit Users54
Delete Users55
Change Fieldserver Password56
Specifications57
Compliance with UL Regulations58
Address Types and Data Types59
Fieldserver Manager Connection Warning Message60
Limited 2 Year Warranty61

MSA fieldserver EZ Series - Login to the Fieldserver Manager

Table of Contents

Related product manuals