MSA TransAire - Page 10

11 US
6 Maintaining the Escape Hood
5. Unscrewandremovethepressureregulatorfromthecylindervalve.

6. Untietheretainingcordtoopenthecylindercarrierandremovetheaircylinder.
7. AddoneounceofConfidencePlusGermicidalCleaneroramildcleaning
solutiontoagallonofwarmwater(maximumtemperature110°F).
8. Submergethehoodandcarrierinthecleaningsolutionandscrubgentlyuntil
theyareclean.
9. Rinsebothhoodandcarrierthoroughlyinplain,warmwater(maximum
temperature110°F),thenairdry.Ifnotrinsedthoroughly,ConfidencePlus
GermicidalCleanermayirritateyourskin.
CAUTION!
Donotforce-drywithheat.Temperaturesabove110°Fmaydistortordamagepartsofthisapparatus.Thehoodisplastic
andmaybescratchedifrubbedwithcoarsedryclothorpapertowels.
Failure to follow this caution can result in minor or moderate injury.

10.UseadampclothorspongesaturatedinConfidencePlusGermicidalCleanerto
cleanthemuffler,mufflercover,diffuser,hoodhose,pressureregulator,cylinder
valveandaircylinderclean.
NOTE: Whentheyhavedried,reinstallthemuffler,diffuser,andmufflercoverin
thehood.
11.Ensurethatthemufflercoverisinstalledandpointedupatapproximately45
degreesleftorrightofcenter.