MSA TransAire - Hood Packing Instructions for Transaire Apparatus

6 Maintaining the Escape Hood
US 14
5. Inspectthecylinderatleastmonthlyorbeforeeachuse,tobesureitisFULL
(2216or3000psionthepressuregauge).
6.3 Hood Packing Instructions for TransAire Apparatus
1. .Laythehoodflatandfoldinthirdslengthwise
2. Foldthetopthirdofthehoodover.
 3. Putthehoodinletassemblyoutsideofthehood.
4. Placethehoodintothepouchonthecarrierbyfirstinsertingthetubeintothe
pouch,followedbythefoldedhood.Leavethehoodinletassemblyexposed.
 5. Waist-Mounted(usingtheoptionalshoulderstrap)