MSD MESO QuickPlex SQ 120 User Manual

Safety Information 11
2.1.3 Hazardous Substances
In accordance with People’s Republic of China Order No. 32 of the Ministry of Industry and Information Technology (Management
Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products), MSD has designated an
environmental protection use period of 50 years for the MESO QuickPlex SQ 120 instrument when used under normal operating
conditions.
Table 2:1 indicates parts containing hazardous substances.
Table 2:1 Hazardous Substances
Part Name
Hazardous Substances
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium (Cr (VI))
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl ethers (PBDE)
Motor with pulley
X
O
O
O
O
O
Contact Board
X
O
O
O
O
O
Cable Assemblies
X
O
O
O
O
O
Printed Circuit Boards
X
O
O
O
O
O
This table was prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit req
uirement of GB/T 26572.
X: Indicates that said hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.
2.2 Symbols and Labels
Table 2:2 defines the symbols found in this manual, on the instrument, and on the instrument labels.
Table 2:2 Symbols and labels
Symbol/Label
Description
WARNING
Warning messages are highlighted with this symbol and the word WARNING in red. They advise
operators of potential mechanical or other hazards and highlight the procedures or information necessary
to avoid personal injury.
CAUTION
Caution messages are highlighted with this symbol and the word CAUTION in red. They highlight
procedures or information necessary to avoid damage to equipment, corruption of software, loss of data,
or invalid test results.
This warning symbol indicates a potential electrical hazard. This device contains high voltage. Disconnect
the device from its power source before changing a fuse, moving the device, or connecting/disconnecting
any cable.
These symbols indicate a risk of exposure to biohazards. Ensure surfaces are decontaminated and
cleaned and proper personal protective equipment is worn to prevent exposure.
This symbol indicates the presence of a Class 1 Laser.
This warning indicates this instrument is an electrostatic sensitive device. The QuickPlex SQ 120 is
sensitive to static discharge in excess of 4.0 kV.
V
This symbol indicates a measurement or requirement in Volts.
A
This symbol indicates a measurement or requirement in Amperes, often referred to as Amps.
~
This symbol indicates electric current is in the form of alternating current (AC).
This symbol indicates electric current is in the form of direct current (DC).

MSD MESO QuickPlex SQ 120 Specifications

General

Brand	MSD
Model	MESO QuickPlex SQ 120
Category	Laboratory Equipment
Language	English