VIA VT8237 Serial ATA RAID Introduction
5-5
Create Your RAID Disk Array Under DOS
When the system powers on during the POST (Power-On Self Test) process, press
<Tab> key to enter the BIOS configuration.
The Serial ATA RAID volume may be configured using the VIA Tech. RAID BIOS. Always
use the arrow keys to navigate the main menu, use up and down arrow key to select
the each item and press <Enter> to call out the list of creation steps. The main interface
of BIOS configuration utility is as below:
MSI Reminds You...
The BIOS Configuration pictures shown below is for your reference only,
and may vary from actual ones.
To Next Page
Loading...
Need help?
General
