MS-6702E ATX Mainboard
5-6
Create Disk Array
Use the up and down arrow keys to select the Create Array command and press
<Enter>.
Select Array Mode and press <Enter>, a list of array modes will appear. Highlight the
target array mode that you want to create, and press <Enter> to confirm the selection.
If RAID 1 is selected, an option list will popup and enable the users to select Create
and duplicate which allows BIOS copy the data from the source to the mirroring drive.
MSI Reminds You...
The “Channel”, “Drive Name”, “Mode” and “Size (GB)” in the following
example might be different from your system.
To Next Page
Loading...
