3-15
BIOS Setup
Integrated Peripherals
On-Chip PATA-IDE Controller
This setting is used to enable/disabled the VT8237 PATA-IDE controller. Setting options:
[Disabled], [Enabled].
On-Chip SATA-IDE Controller
This setting is used to enable/disabled the VT8237 SATA-IDE controller. Setting options:
[Disabled], [Enabled].
USB Controller
This setting is used to enable/disable the onboard USB ports. Setting options: [Disabled],
[Enabled].
USB Legacy Support
Set to [Enabled] if you need to use any USB device in the operating system that does
not support or have any USB driver installed, such as DOS and SCO Unix. Setting
options: [Disabled], [Enabled].
OnBoard PCI Controller
Press <Enter> to enter the sub-menu screen.
LAN Controller, 1394 Controller, P20579 S.ATA Controller, Audio
Controller
Set these options to [Enabled] or [Auto] (set [SATA] or [RAID] for P20579 S.
ATA Controller) to enable the controllers of these four PCI devices.
To Next Page
Loading...
Need help?
General
