MSI Media Live - Installing the Remote Control Batteries

5-36
MS-6421 Media Center
Installing the Remote Control Batteries
1. Open up the battery cover from the back of the remote control.
2. Insert two AA 1.5V alkaline batteries. (provided)
3. Replace the battery cover.
4. Test the remote control by pressing any key. The indicator light should blink.
Back View
Open up the battery
cover this direction
1 2
Battery Con-
tainer
IECR06/AA/UM-3/1.5V
-
+
+
-
Important
Make sure the battery positive and negative ends are inserted correctly.
PDF created with pdfFactory Pro trial version www.pdffactory.com