Chapter 3
3-24
Wake Up On LAN/Ring
To use this function, you need a LAN add-on card or Modem which sup-
ports power on functions. During Disabled, the system cannot be booted
up through LAN and ignores any incoming call from the modem. During
Enabled, the system can be booted up through LAN and modem.
RTC Alarm Resume
This function is for setting date and time for your computer to boot up.
During Disabled, you cannot use this function. During Enabled, choose the
Date and Time Alarm:
Date (of month) You can choose which date the
system will boot up. Set to 0, to boot
every day.
Resume Time (hh:mm:ss) You can choose what hour, minute and
second the system will boot up.
Note: If you have changed the setting, you must let the system boot up
until it enters the operating system and turn off the system. Next
time when you power on the system, the modified settings will come
into effect.
IRQs Wake Up Event
When On, any activity from one of the IRQs wakes up the system
To Next Page
Loading...
