BIOS Setup
Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled] Enable the USB support for legacy operating systems that do not
support USB.
[Disabled] The USB devices are available only for UEFI applications.
Power Management Setup
<Enter> to enter the sub-menu.
regulation.
regulation.
[Disabled] Disables this function.
and PCIe devices.
Restore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power On] Boot up the system after restoring AC power.
before AC power loss.
On board Function LED Control [On]
Enables or disables the onboard non-function LEDs.
[On] Enables onboard non-function LEDs.
sub-menu.
Windows 8/ 8.1 Feature [Disabled]
Enables the supports for Windows 8 or disables for other operating systems.
software) should meet the Windows 8 requirements.
[Enabled] The system will switch to UEFI mode to meet the Windows 8
requirement.
[Disabled] Disables this function.
MSI Fast Boot [Disabled]
MSI Fast Boot is the fastest way to boot the system. It will disable more devices to
speed up system boot time which is faster than the boot time of “Fast Boot”.
[Enabled] Enables the MSI Fast Boot function to speed up booting time. And
[Disabled] Disables MSI Fast Boot.
To Next Page
Loading...
Need help?
General
