MTS Sensors Temposonics ET Series User Manual

QPS Evaluation Services Inc
Testing, Certification and Field Evaluation Body
Accredited in Canada, the USA, and Internationally
File
LR1346
81 Kelfield St., Units 7-9, Toronto, ON M9W 5A3 Tel: 416-241-8857; Fax: 416-241-0682
www.qps.ca
QSD 34 Rev 04
CERTIFICATE OF COMPLIANCE
(ISO TYPE 3 CERTIFICATION SYSTEM)
Issued to MTS Sensor Technologie GmbH & Co KG
Address
Auf Dem Schüffel 9, Lüdenscheid,
Germany, D-58513
Project Number
LR1346-3
Product
Linear Position Sensors
Model Number
Tempsonics ® E-Series ET (see annex below for full model information)
Ratings/Markings
see annex below for full marking information
Applicable Standards
CSA C22.2 No. 60079-0:2015, CSA C22.2 No. 60079-15:2016, CSA
C22.2 No 60079-31:2015, CSA C22.2 No 61010-1:2012, CSA C22.2
94.2:2015
ANSI/ISA 12.12.01 (2015), ANSI/UL 61010-1 (2012), ANSI/UL 50E 2nd
Edition, ANSI/UL 60079-0 (2013), ANSI/UL 60079-31 (2015), ANSI/UL
2225 (2013)
Factory/Manufacturing Location
Same as above
Statement of Compliance: The product(s) identified in this Certificate and described in the Report covered
under the above referenced project number have been investigated and found to be in compliance with the
relevant requirements of the above referenced standard(s). As such, they are eligible to bear the QPS
Certification Mark shown below, in accordance with the provisions of QPS’s Service Agreement.
Issued By: Dave Adams P.Eng.
Signature:
Date: March 28, 2017

MTS Sensors Temposonics ET Series Specifications

General

Brand	MTS Sensors
Model	Temposonics ET Series
Category	Accessories
Language	English