Table of Contents
Section Page
1 INTRODUCTION 1
1.1 System Configuration 2
2 SPECIFICATIONS 3
2.1 MK292 Specifications 3
2.2 Temposonics Position Sensor Specifications 4
3 SYSTEM COMPONENTS 5
3.1 MK292-Compatible Temposonics Position Sensors 5
3.1.1 Temposonics Position Sensor with Start/Stop Output 5
3.1.2 Temposonics Position Sensor with Pulse Width Modulated Output 5
3.1.3 Temposonics Position Sensor with Synchronous Operation 5
4 CONNECTIONS 6
4.1.1 Temposonics II Position Sensors with DPM or RPM 6
4.1.2 SE-based Temposonics LP Position Sensors with Start/Stop Output 6
4.1.3 Temposonics L Series Position Sensors with Start/Stop Output 7
4.2 System Connections 9
4.3 Functional Inputs/Outputs 10
4.3.1 Error Output (Loss of Feedback) 10
4.3.2 Data-Ready Output (Latch Pulse) 10
4.3.3 Data-Hold Input (Latch Inhibit) 11
4.3.4 External Start Input 11
4.3.5 Master/Slave Input 11
5 SYSTEM PARAMETERS 12
6 SHORT FORM PROGRAMMING PROCEDURE 14
7 DETAILED PROGRAMMING PROCEDURE 15
7.1 (RUN) Programming Mode 15
7.2 (REC) Pulse Duration 15
7.3 (SC) Scale Factor 17
7.4 (RE) Resolution 18
7.5 (MR) Measuring Range 19
7.6 (ZERO) Null Adjust 20
7.7 (ZERO) Offset 20
7.8 (RUN) Operation Mode 22
8 OPTIONAL ANALOG OUTPUT FOR THE MK292 23
8.1 Operation Mode 1 (Normal) 23
8.2 Operation Mode 2 (Programmable Adjustment) 24
To Next Page
Loading...