General conditions (for max. power)
ID 1 2 3
Intake depression (new filter) A mbar 30 30 30
Intake depression, max. L mbar 50 50 50
Exhaust overpressure A mbar 37 37 37
Exhaust overpressure, max. L mbar 50 50 50
Model related data (basic design)
ID 1 2 3
Cylinder arrangement: V angle Degrees 90 90 90
Bore mm 165 165 165
Stroke mm 190 190 190
Displacement of a cylinder Liters 4.1 4.1 4.1
Total displacement Liters 65.0 65.0 65.0
Number of inlet valves per cylinder 2 2 2
Number of exhaust valves per cylinder 2 2 2
Combustion air / exhaust gas
ID 1 2 3
Charge-air pressure before cylinder R bar 2.0 2.1 1.95
Exhaust gas temperature R °C 377 377 376
Coolant system (HT circuit)
ID 1 2 3
Coolant temperature (at engine connection:
outlet to cooling equipment)
A °C 95 95 95
Coolant pump: inlet pressure, max. R bar 1.5 1.5 1.5
Thermostat: Starts to open R °C 76 76 76
Thermostat: Fully open R °C 87 87 87
Lube oil system
ID 1 2 3
Lube oil operating pressure upstream of engine,
from
R bar 6.1 6.1 6.0
Fuel system
ID 1 2 3
Fuel temperature before pump, max. L °C 60 60 60
MS150049/04E 2017-04 | Technical Data | 33
TIM-ID: 0000040208 - 002
To Next Page
Loading...
