EasyManua.ls Logo

MTU 16V4000C21 - Page 58

MTU 16V4000C21
161 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Flash-
ing
code
PID SID FMI Description Maintenance tasks
13 111 6 Sensor "Top up coolant", in-
put voltage too low.
1. Check coolant condition
(→ Page 123).
2. Check coolant level, top up if
required (→ Page 116).
3. Check cabling.
4. Contact Service.
14 52 3 Temperature sensor/inter-
cooler, input voltage too
high.
1. Check cabling.
2. Contact Service.
14 110 3 Coolant temperature sensor,
input voltage too high.
1. Check cabling.
2. Contact Service.
14 175 3 Oil temperature sensor, in-
put voltage too high.
Contact Service.
15 52 4 Temperature sensor/inter-
cooler, input voltage too low.
1. Check cabling.
2. Contact Service.
15 110 4 Coolant temperature sensor,
input voltage too low.
1. Check cabling.
2. Contact Service.
15 175 4 Oil temperature sensor, in-
put voltage too low.
Contact Service.
16 111 3 Coolant level sensor, input
voltage too high.
1. Check coolant condition
(→ Page 123).
2. Check coolant level, top up if
required (→ Page 116).
3. Check cooler for dirt.
4. Check cabling.
5. Contact Service.
16 111 5 Sensor "Top up coolant", in-
put voltage too high.
1. Check cabling.
2. Contact Service.
17 51 3 Throttle sensor, input voltage
too high.
1. Check cabling.
2. Contact Service.
17 72 3 Blower bypass position, in-
put voltage too high.
1. Check cabling.
2. Contact Service.
17 354 3 Humidity sensor, electric cir-
cuit defective / high (version
33.0 or later).
1. Check cabling.
2. Contact Service.
18 51 4 Throttle sensor, input voltage
too low.
1. Check cabling.
2. Contact Service.
18 72 4 Blower bypass position, in-
put voltage too low.
1. Check cabling.
2. Contact Service.
18 354 4 Humidity sensor, electric cir-
cuit defective / low (version
33.0 or later).
1. Check cabling.
2. Contact Service.
21 91 3 Throttle sensor, input voltage
too high.
1. Check cabling.
2. Contact Service.
22 91 4 Throttle sensor, input voltage
too low.
1. Check cabling.
2. Contact Service.
23 174 3 Fuel temperature sensor, in-
put voltage too high.
1. Check cabling.
2. Contact Service.
58 | Troubleshooting | MS150049/04E 2017-04
TIM-ID: 0000003162 - 002

Table of Contents

Related product manuals