Sentry II with Water Works Box Operating Instructions Effective April 1, 2000
Part No. 8823728 Revised November 10, 2003
1
SECTION 5.0 - CHEMICAL DOSING WITH SENTRY II WATER BOX
5.1 Determining Chemical Usage
The chemical usage will vary depending on the make and manufacturer, the amount of water required
for each cycle, and the water quality. It is very important to have your Chemical Supplier test the water
supply and determine the proper usage and concentrations of each specific chemical. This information
should be posted on a cleaning chart near the milk cooler.
IMPORTANT NOTE: Improper chemical usage can cause non-warranted and non-repairable damage
to your stainless steel milk cooler. Chemicals should be purchased from a reputable source that
specializes in the proper application and usage of dairy cleansers for clean-in-place (CIP) applications.
5.2 Chemical Cautions (Additional Cautions are Listed in Section 2.15)
• Proper safety precautions must be followed when handling chemicals.
• Read and abide by all Material Safety Data Sheets (MSDS), labels, instructions, warnings, and
health hazard information provided by the Chemical Manufacturer.
• Eye, face, and skin protection should be worn at all times!
• Prime peristaltic pumps in a glass jar only. Do not prime the pumps into the milk cooler.
• Without proper dilution, chemicals can damage the stainless steel milk cooler.
• Never mix chemicals — a deadly gas may be created.
• Ensure that all drains are properly trapped to prevent mixed chemical gasses from re-entering the
workplace.
• Store chemicals in an area protected from freezing and out of direct sunlight.
• Store chemicals in an area that prevents access by children or unauthorized individuals.
To Next Page
Loading...
Need help?
General
