Sentry II with Water Works Box Operating Instructions Effective April 1, 2000
Part No. 8823728 Revised November 10, 2003
SECTION 11.0 - DISPOSAL
11.1 General
If the milk cooler and controls are removed from the installation site, ensure the materials, refrigerants,
and chemicals are handled and/or disposed of according to applicable codes and regulations.
11.2 Chemical Disposal
All detergents, acids, sanitizers, refrigerants, and oils can be harmful and toxic to the environment if
not properly disposed of. Consult each chemical label and comply with all local environmental
regulations and agencies.
11.3 Solid Component Disposal
The milk cooler’s basic components consist of steel, copper, rubber, and plastics which may be
separated and recycled. The “CFC-Free” foam insulation should be disposed of according to local
environmental regulations and agencies.
61
To Next Page
