Need help?Do you have a question about the Mueller ISOBUS SPRAYER-Controller MIDI 3.0 and is the answer not in the manual?
General| Brand | Mueller |
|---|---|
| Model | ISOBUS SPRAYER-Controller MIDI 3.0 |
| Category | Controller |
| Language | English |
Provides essential instructions for safe operation and servicing of the equipment.
Outlines the necessary qualifications and responsibilities for operating the product.
Defines the product's intended application in agriculture and manufacturer liability.
Provides essential safety guidelines for installing the system components correctly.
Step-by-step guide for connecting the job computer to the tractor's ISOBUS socket.
Detailed explanation of the work screen areas and their information content.
Explains the information displayed in the spray data area of the work screen.
Details the meaning of various icons displayed in the spray data area.
Describes the information shown in the boom display, including section status.
Explains icons providing status and function information related to the implement.
Explains general and specific icons displayed on the implement image.
Instructions for entering tank content after refilling using various methods.
Instructions for controlling the field sprayer boom using the terminal interface.
Details how to lift and lower the boom using function keys and joystick.
Procedure to lock the boom for stability and its visual indicators.
Explains the function of folding the field sprayer boom in and out.
Details how to raise and lower boom sides independently or simultaneously.
Instructions for sloping the boom to the left or right using function keys.
Prerequisites and steps for starting the spray application in manual and automatic modes.
Overview of application rate regulation methods and work modes.
How to manually adjust the application rate using the joystick.
Explains automatic mode and conditions required for its correct operation.
Methods for specifying the desired spray application rate per hectare.
Instructions for operating individual sections using function keys.
How to activate and deactivate field sprayer functions using the ME joystick.
Explains AIRTEC system for regulating drop size by adding compressed air.
Procedures for switching the air compressor on and off via function buttons.
How to select desired drop size and adjust air pressure in automatic mode.
How to manually control air pressure and its effect on drop size.
How to enter and change parameters like nozzle, rate, and working width.
When and how to calibrate the flow meter for accurate measurements.
How to select and configure the source for speed signals.
Steps to configure sections, including entering nozzle counts.
How to configure nozzles for calculating application rate based on spray pressure.
Enables simultaneous use of multiple nozzles for constant drop size.
How to configure AIRTEC by selecting the nozzle number for mounted nozzles.
When and how to calibrate TRAIL-Control, including warning for movement.
Steps to switch off and lock TRAIL-Control before driving on public roads.
To Next Page
