MULTILIFT Ultima S Flex - Diagnostic codes (Conflicts)

174
Ultima S / SL Flex & Pro
3/2019
114060421
Hooklift Multilift Ultima S / SL Flex & Pro
Service Manual
>>>
ERROR CODE
COMMENTS / PROBLEM LOCATION
PROGRAM DESCRIPTION POSSIBLE ACTION CONSEQUENCE
CONFLICTS
C000
NONE OR SEVERAL INPUTS PRESENT AT MODE SWITCH CONTROL BOX
MODE SWITCH CONFLICT REPLACE BOX NO HOOKLIFT
FUNCTION
C001
VALUES FROM JOYSTICK NOT LEGAL CONTROL BOX
JOYSTICK CONFLICT REPLACE JOYSTICK NO HOOKLIFT
FUNCTION
C002
BOTH INPUTS PRESENT AT CONTROL BOX CONTROL BOX
ROCKER SWITCH
CONFLICT 1
REPLACE ROCKER SWITCH 1
C003
BOTH INPUTS PRESENT AT CONTROL BOX CONTROL BOX
ROCKER SWITCH
CONFLICT 2
REPLACE ROCKER SWITCH 2
C004
BOTH INPUTS PRESENT AT CONTROL BOX CONTROL BOX
ROCKER SWITCH
CONFLICT 3
REPLACE ROCKER SWITCH 3
C005
BOTH INPUTS PRESENT AT CONTROL BOX CONTROL BOX
ROCKER SWITCH
CONFLICT 4
REPLACE ROCKER SWITCH 4
C006
BOTH INPUTS PRESENT AT CONTROL BOX CONTROL BOX
ROCKER SWITCH
CONFLICT 5
REPLACE ROCKER SWITCH 5
C007
MIDDLE FRAME DOWN SENSOR IS 1 AND REAR FRAME IS 0 HOOKLIFT
INPUTS CONFLICT 1 CHECK MIDDLE FRAME DOWN & REAR FRAME DOWN
SENSORS - REPLACE IF NECESSARY
C008
MIDDLE FRAME DOWN SENSOR IS 1 AND MIDDLE FRAME
NEARLY DOWN IS 0
HOOKLIFT
INPUTS CONFLICT 2 CHECK MIDDLE FRAME DOWN & MIDDLE FRAME NEARLY
DOWN SENSORS - REPLACE IF NESSECARY
C009
BODYLOCKS OPEN IS 1 AND BODYLOCKS CLOSED IS 1 HOOKLIFT
INPUTS CONFLICT 3 CHECK BODYLOCKS OPEN AND BODYLOCKS CLOSED
SENSORS - REPLACE IF NECESSARY