MULTILIFT Ultima SL Flex - Page 144

144
Ultima S / SL Flex & Pro
3/2019
114060421
Hooklift Multilift Ultima S / SL Flex & Pro
Service Manual
Safety instructions
Loose, long hair, loose clothing, jewellery etc. are an accident risk.
Use always personal protections and other protective means in service work.
All modications and additions made to the equipment construction, which might have an
e󰀨ect to the operational safety of the hooklift, are prohibited. In general, all modication
and additional work on the equipment must be consulted with the dealer or manufacturer
of the equipment. Also a more extensive repair work or welding work to be done on frames
must be approved by an authorised service shop or the manufacturer of the equipment.
All the spare parts must conform with the technical requirements of Multilift. The best way
to ensure this is to use the original Multilift spare parts.
The safe and easy accomplishment is best achieved by using the correct and sound tools.
Note the service and inspection periods mentioned in this instruction and the replacement
needs of parts which have been noted in connection with the equipment inspection.
Wash and clean the equipment regularly before any service work.
Never service an equipment when the truck engine is running or the PTO is engaged.
Each service work must have a named responsible person who is responsible for the
vocational skills of the person carrying out the work.
Try always to separate the service area from persons not involved.
Before water wash, cover and protect all the electric components and connections. Do not
direct the washing agents to hot points.
High-pressure water jets must not be used when cleaning the device, since they may easily
harm sensitive components.