MULTILIFT Ultima SL Flex - Maintenance and Service; Service Indicator

143
Ultima S / SL Flex & Pro
3/2019
114060421
Hooklift Multilift Ultima S / SL Flex & Pro
Service Manual
This manual is a translation from the original maintenance instructions
compiled in Finnish.
Service Indicator
The service interval of the MULTILIFT hooklift is approximately
100 operating hours or 2,000 service cycles, depending on
which limit is reached rst.
The ”SERV” notication displayed in connection with the start-
up indicates imminent service. This notication is shown for
approximately 13 operating hours before the service time.
Contact your own HIAB service to book the service.
A permanent ”SDUE” text on the display indicates immediate
service. This notication is reset by an authorized HIAB service
point in connection with the service.
MAINTENANCE
Regular and correctly timed maintenance will increase the safety, reliability and economy
of the hooklift equipment. All accomplished services and replacements of wearing parts
are worth while to record.
In connection with the maintenance work, the work safety must be noted and all possible
danger elements must be kept in mind by everybody participating. This instruction must
be read carefully before commencing any service work.
The equipment operator can carry out the daily, weekly and monthly services described
in these instructions. If there appears damages, hydraulic leaks, malfunctions or other
problems with the equipment, contact the nearest Multilift service point. Repairs related
to these may be carried out only by the professional and trained personnel. Especially
the electrical system and the hydraulics are such which require specialised competence.
Wash the equipment carefully with low pressure washer before inspection and service. Dry
and check all electrical components after washing.