MULTILIFT Ultima SL Flex - Page 92

92
Ultima S / SL Flex & Pro
3/2019
114060421
Hooklift Multilift Ultima S / SL Flex & Pro
User Manual
Switch and signal light of hydraulic body locks
The body locks are opened by pressing the switch in the control unit. A burning lock signal
light on the control unit means that the body locks are not fully closed.
The signal light blinks if the lock hooks are between the open and closed positions.
When in tra󰀩c, no driving or tipping is to be commenced if the light is on. Remove the
element obstructing the locks, or if they are obstructed by the lock pocket in the container
frame beam, check that the container is correctly positioned on top of the hook device.
Function Open body locks Close body locks
LED comes on LED o󰀨
LEDs
2GCC
Display
and LEDs
2GRC
LEDs
2GMR
Button