Self-moving multipurpose loader MULTIONE
1 Series
Instruction manual (Traslation of original instructions)
CM170001EN - 01.03.17 - 03 (11.07.18)
25/49
MultiOne SRL
6 ASSEMBLY AND INSTALLATION
6.1 Assembly
The machine is supplied by the Manufacturer ready to use without need of any installation or connection.
6.2 Options
On the website www.multione.com it is possible to check the availability of options.
WARNING
THE OPTION INSTALLATION, UNLESS OTHERWISE INDICATED, MUST BE CARRIED OUT BY AN AUTHORISED DEALER AND/OR BY
A WORKSHOP AUTHORISED BY THE MANUFACTURER.
LOOK UP THE MANUFACTURER WEBSITE (WWW.MULTIONE.COM) AND YOUR OWN DEALER TO CHECK THE COMPATIBILITY OF
THE OPTIONS WITH YOUR MACHINE.
ATTENTION
IT IS FORBIDDEN TO INSTALL NOT ORIGINAL ACCESSORIES ON THE MACHINE.
6.3 Attachments
6.3.1 Available attachments
The machine has been planned to be used with multiple attachments assembled to the quick universal connection plate. You can
examine the attachment list on the website: www.multione.com. The list is not reported in this document because the attachments
are always continuously updated and expanded. Each attachment purchased directly from the manufacturer or from his authorised
dealers it is implicitly authorised to be installed on the machine.
DANGER
IT IS FORBIDDEN TO ASSEMBLE NOT SUITABLE AND NOT ORIGINAL ATTACHMENTS TO THE MACHINE.
WARNING
IT IS COMPULSORY TO ADDRESS THE TRUST DEALER TO MAKE SURE OF THE COMPATIBILITY BETWEEN THE ATTACHMENT
AND THE MACHINE.
ATTENTION
THE MANUFACTURER ACCEPTS NO RESPONSABILITY FOR ANY DAMAGE TO PEOPLE, ANIMALS OR THINGS, BY THE
INOBSERVANCE OF THE INSTRUCTIONS DESCRIBED IN THIS MANUAL.
6.3.2 Assembly of the attachments
Procedures of assembly and disassembly are described in chap. 8.
ASSEMBLY AND INSTALLATION -6
To Next Page
Loading...
Need help?
General
