Self-moving multipurpose loader MULTIONE
1 Series
MultiOne SRL
Instruction manual (Traslation of original instructions)
CM170001EN - 01.03.17 - 03 (11.07.18)
6/49
1- DOCUMENT IDENTIFICATION
2 MACHINE IDENTIFICATION
2.1 Copy of CE accordance statement
CE ACCORDANCE STATEMENT
Manufacturer
MULTIONE SRL SOCIETÀ UNIPERSONALE
via Palù, 6/8
36040 Grumolo Delle Abbadesse (VI) Italy
Tel. +39 0444 264600
info@multione-csf.com
Fax +39 0444 389260
www.multione.com
We declare that the machine is so identified
Name Self-propelled multipurpose loader with articulated chassis “MULTIONE”
Model
M1 1.1
Serial number
....................................
It is conform to the instructions of the following directives
2006/42/CE
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending
Directive 95/16/EC (recast)
2014/30/EU
Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of
the Member States relating to electromagnetic compatibility (recast).
2000/14/CE
Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws
of the Member States relating to the noise emission in the environment by equipment for use outdoors
Notified organisation
VERICERT SRL - Certificazioni e Verifiche
Via S. Cavina n. 19 - 48100 Ravenna - Italy
NOTIFIED ORGANISATION N. 1878
Evaluation procedure
Internal control of production with assessment of
technical documentation and periodical checking
procedure referred to in Annex VI
Guaranteed sound power level (L
WA
)
100 dB
Sound power level measured (L
WA
)
97 dB
Net installed power 6,7 kW @ 3600 rpm
Test engine rpm 1800 rpm
Main regulations harmonized among those applied
EN 12100-1-2:2003 / A1:2009 Safety of machinery. Basic concepts, general principles for design
EN 474-1:2006 / A1:2009 Earth-moving machinery - Safety - Part 1: General requirements
EN 474-3:2006 / A1:2009 Earth-moving machinery - Safety - Part 3: Requirements for loaders
Person authorized to keep updated the Technical Booklet
Name and roll
Carraro Giuseppe - Technical Manager
Person authorized to draw up the statement
Name and roll
Carraro Giuseppe - Technical Manager
Place
Grumolo delle Abbadesse (VI) Italy
Date
.........../.........../..........
Signature