Self-moving multipurpose loader MULTIONE
1 Series
Instruction manual (Traslation of original instructions)
CM170001EN - 01.03.17 - 03 (11.07.18)
7/49
MultiOne SRL
2.2 Designation
The machine in question is so named:
Self-moving multipurpose loader Multione - 1 Series - Model M1 1.1
N.B. The model of the machine is reported on the statement CE of conformity and on the marking CE applied to the machine.
3 IMPORTANT INFORMATION ABOUT SAFETY
3.1 General instructions
DANGER
IT IS COMPULSORY TO CONTROL CONSTANTLY THE PROPER FUNCTIONING OF ALL THE SAFETY DEVICES INSTALLED ON THE
MACHINE.
IT IS COMPULSORY TO SUBSTITUTE AT THE RIGHT TIME POSSIBLE AND NOT WORKING WELL AND/OR DAMAGED SAFETY
DEVICES.
DANGER
IT IS FORBIDDEN TO REPLACE ANY SHELTER, SAFETY DEVICE OR ONE OF ITS COMPONENTS WITH NON ORIGINAL SPARE
PARTS.
IT IS FORBIDDEN TO ALTER, EXCLUDE AND/OR REMOVE ANY SHELTER AND SAFETY DEVICE ON THE MACHINE.
3.2 Residual risks
We inform the operator in charge that though the manufacturer has adopted all possible technical structural precautions to make
the machine sure, possibile residual risks remain. They are described in succession.
WARNING
THE RESIDUAL RISKS REPORTED IN SUCCESSION CONCERN THE MACHINE WITHOUT ASSEMBLED EQUIPPING. WE REFER TO
THE EQUIPPING MANUAL FOR THE DESCRIPTION OF THE RESIDUAL SPECIFIC EQUIPPING RISKS.
THERE IS THE RESIDUAL RISK OF INJURIES IN CONSEQUENCE OF FALL OF OBJECTS OR MATERIAL FROM THE POSSIBLE
ATTACHMENT ASSEMBLED TO THE MACHINE. CONSULT THE ASSEMBLED ATTACHMENT MANUAL TO VERIFY THE PRESENCE
OF THIS RISK.
DANGER
TO MINIMIZE THE EXPOSITION TO RESIDUAL RISKS IT IS COMPULSORY TO RESPECT THE SAFETY SIGNS
(SEE PAR. 4.10) AND WEAR THE INDIVIDUAL PROTECTION (SEE PAR. 4.12) REPORTED IN THIS MANUAL.
RESIDUAL RISK N. 1
THERE IS DANGER OF BURN FOR CONTACT IF THE AUTHORIZED OPERATOR GET INTO CONTACT WITH THE HOT PARTS SUCH
AS QUICK CONNECTIONS, HYDRAULIC CYLINDERS, HYDRAULIC HOSES, PARTS OF THE ENGINE THAT, OWING TO PROLONGED
USE OF THE MACHINE CAN REACH HIGH TEMPERATURES.
IT IS COMPULSORY TO RESPECT THE ASSEMBLY PROCEDURES, ATTACHMENT DISASSEMBLY (SEE CHAP. 8) AND ORDINARY
MAINTENANCE PROCEDURES (SEE CHAP. 9) DESCRIBED IN THIS MANUAL.
RESIDUAL RISK N. 2
THERE IS THE DANGER OF INJURIES OWING TO CONTACT WITH MOBILE PARTS IN MOTION IF THE AUTHORISED OPERATOR
DOES NOT RESPECT THE INSTRUCTIONS REPORTED IN THIS MANUAL AND, PARTICULARLY, STRECHES OUT HIS UPPER LIMBS
OUTSIDE THE DRIVING SEAT DURING THE ORDINARY WORKING OF THE MACHINE.
IT SI COMPULSORY TO RESPECT THE PROCEDURES OF ASSEMBLY, DISASSEMBLY OF THE EQUIPPING (SEE CHAP. 8), THE
ORDINARY MAINTENANCE PROCEDURES (SEE CHAP. 9) AND THE INSTRUCTIONS FOR A RIGHT POSITION TO ASSUME DURING
THE USE (SEE PAR. 8.3.1.1) DESCRIBED IN THIS MANUAL.
IMPORTANT INFORMATION ABOUT SAFETY -3
To Next Page
Loading...
Need help?
General
