MultiOne 1 Series User Manual

Self-moving multipurpose loader MULTIONE
1 Series
MultiOne SRL
Instruction manual (Traslation of original instructions)
CM170001EN - 01.03.17 - 03 (11.07.18)
30/49
FIG. 12
1
4
3
2
A B
C D
5
6
8.3.4.2 Hydraulic connection of the attachment (if necessary)
DANGER
IT IS FORBIDDEN TO CARRY OUT THE CONNECTION OF THE HYDRAULIC HOSES WHEN THE ENGINE OF THE MACHINE IS
WORKING UNTIL YOU HAVE RELEASE THE RESIDUAL PRESSURE OF THE HYDRAULIC SYSTEM AND HAVE COMPLETED THE
PROCEDURE FOR ASSEMBLY.
WARNING
BEFORE MAKING CONNECTIONS READ THE ATTACHMENT INSTRUCTION MANUAL.
WARNING
THERE IS RESIDUAL RISK N. 1 (SEE PAR. 3.2).
Before making hydraulic connections between the machine and the attachment (outflow FIG. 13 - Ref. 1 and inflow
FIG. 13 - Ref. 2), you need to release the residual pressure in the hydraulic circuit of the machine. To make this proceed as follows:
1) Turn off the machine (see par. 8.3.7).
2) Operate the control lever (FIG. 11 - Rif. 1) of the flow of the quick couplings moving it to the Right and to the Left.
8- OPERATION

MultiOne 1 Series Specifications

General

Brand	MultiOne
Model	1 Series
Category	Compact Loader
Language	English