Self-moving multipurpose loader MULTIONE
1 Series
MultiOne SRL
Instruction manual (Traslation of original instructions)
CM170001EN - 01.03.17 - 03 (11.07.18)
42/49
9.7.8 Greasing points
DANGER
IT IS MANDATORY TO INSTALL THE LIFTING BOOM SAFETY BLOCK WHEN PERFORMING MAINTENANCE WITH THE LIFTING
BOOM RAISED.
The FIG. 24 shows the location of greasing points.
Clean the greasing points with a cloth and apply grease type 0088 PAKELO BEARING EP GREASE NLG I 0.
Remove the rear cover to achieve the greasing points of the steering cylinder.
Remove the front side panels to achieve the greasing points of the plugs of the boom.
The greasing point at the base of the boom lifting cylinder is positioned under the machine.
9- MAINTENANCE