MultiOne 1 Series User Manual (English)

Questions and Answers:

J
Jonathan KerrAug 4, 2025
Why MultiOne Compact Loader engine does not crank?
- M
  Matthew SheltonAug 5, 2025
  The engine might not crank due to several reasons. It could be a discharged battery or low battery voltage, in which case you should check and charge the battery. Another cause could be a blown fuse, so check the fuses, and if the fuse blows again, find out the cause and contact service. Also, check the battery cables and posts for poor connections or disconnections; clean and retighten if necessary.
F
Frank GallagherAug 14, 2025
What to do if MultiOne Compact Loader engine cranks but does not start?
- S
  Shaun WalkerAug 14, 2025
  If the engine cranks but doesn't start, there could be a few reasons. You might have no fuel or the wrong type of fuel, so drain the tank and fill it with the correct type. Also, drain any water from the fuel filter and prime the fuel system. Another possibility is that the engine isn't getting fuel due to a clogged fuel filter or fuel line. Ensure the fuel hoses and fuel filter are clean and not frozen, replace the fuel filter, and clean the fuel lines. Finally, a discharged or damaged battery can also cause this issue, so charge or replace the battery if needed.
J
Jennifer MillerAug 25, 2025
What to do if MultiOne Compact Loader does not move after releasing the parking brake?
- S
  Sara DavisAug 25, 2025
  The loader might not move, even after releasing the parking brake, due to low hydraulic charge pressure. Contact service for a pressure check.

MultiOne 1 Series Specifications

General

Brand	MultiOne
Model	1 Series
Category	Compact Loader
Language	English

Summary

Document Identification

Designation

Defines the manual and its compliance with safety requirements.

Identification

Details how the manual is identified by code, issue, and revision.

Glossary and Abbreviations

Glossary of Terms

Provides definitions for key terms used in the manual.

List of Abbreviations

Lists abbreviations and their meanings for clarity.

Consultation Notes and Safety Symbols

Document Receivers and Warranty

Authorized Operator Roles

Defines operator roles: In Charge, Assigned to Handling, and Technician.

Machine Identification and CE Compliance

CE Accordance Statement Details

Details the machine's compliance with EU directives and harmonized standards.

Machine Designation and General Safety

General Safety Instructions

Emphasizes mandatory checks of safety devices and use of original parts.

Residual Risks Overview

Details potential risks like burns, contact with moving parts, and crushing.

Specific Residual Risks and Transport

Specific Residual Risks

Further details on risks: crushing from falling attachments, rolling over, and hearing injuries.

Transport and Lifting Safety

Provides warnings and instructions for safe transport and lifting operations.

Maintenance Safety Precautions

Machine Description and Components

Main Parts and Functions

Identifies and describes the primary components of the machine.

Machine Components and Operator Positions

Machine Components Details

Detailed list of machine parts and their specific functions.

Operator Seating and Work Positions

Illustrates and describes safe working positions for operators.

Authorized Operator Work Positions

Control Devices Overview

Control Panel Functions

Details the layout and function of the control panel elements.

Control Lever and Pedal Functions

Safety Devices and Intended Use

Safety and Protection Devices

Lists and explains the machine's safety features and protective devices.

Intended Use and Operator Requirements

Defines the machine's applications, location of use, and operator qualifications.

Machine and Engine Technical Data

Machine Specifications

Details technical specifications for the machine, including dimensions and weight.

Engine Specifications

Details engine parameters such as fuel, cylinders, power, and tank capacity.

Load Capacity Diagram and Limits

Hydraulic Flow and Misuse Warnings

Hydraulic Flow vs. Engine Speed

Shows the relationship between hydraulic flow rate and engine speed.

Reasonable Foreseeable Misuse

Lists prohibited actions and improper uses of the machine.

Safety Warnings and Sign Identification

Safety Signs Identification

Explains the purpose and meaning of various safety signs applied to the machine.

Safety Sign Illustrations and Meanings

Detailed Safety Sign Meanings

Operator Safety and Protection Signs

Machine Emissions and PPE

Sound Level and Vibrations

Reports measured sound pressure, power levels, and vibration data.

Personal Protective Equipment (PPE)

Specifies mandatory PPE for operators, including hand, foot, body, and head protection.

Transport and Handling Procedures

Transporting the Machine

Describes general methods for transporting the machine to the customer.

Safe Machine Lifting

Details safe procedures for lifting the machine using a pallet and forklift.

Handling and Storage of the Machine

Machine Handling

Explains how to move the machine independently and when using other transport means.

Machine Storage Guidelines

Provides instructions for storing the machine during long periods of disuse.

Assembly, Options, and Attachments

Machine Assembly and Options

Confirms machine readiness and guides on installing optional equipment.

Attachment Assembly

Refers to Chapter 8 for instructions on assembling and disassembling attachments.

Attachment Compatibility and Use

Attachment Assembly Procedures

Refers to Chapter 8 for instructions on assembling and disassembling attachments.

Pre-Start Inspection and Adjustments

Pre-Start Inspection Checklist

Lists essential checks to perform before the initial machine startup.

Driving Seat Adjustment

Explains how to adjust the driver's seat for optimal comfort and control.

Machine Operation and Starting

Pre-Ignition Checks

Details critical checks required before starting the machine's engine.

Starting the Engine

Provides step-by-step instructions for starting the engine in cold and hot conditions.

Normal Operations and Handling

Getting On and Posture

Instructs on how to safely mount the machine and adopt a correct posture.

Machine Handling and Movement

Explains how to safely handle and maneuver the machine.

Attachment Connection and Disassembly

Mechanical Attachment Connection

Details the process for connecting mechanical attachments to the machine.

Hydraulic Attachment Connection

Guides on safely connecting hydraulic hoses for attachments.

Attachment Disassembly and Use

Attachment Disassembly

Provides instructions for safely removing attachments from the machine.

Using the Attachment

Offers advice on the safe use of assembled attachments.

Machine Shutdown and Parking Brake

Turning Off the Machine

Step-by-step procedure for safely shutting down the machine.

Parking Brake Operation

Explains how to engage and disengage the parking brake.

Refuelling and Exceptional Situations

Refuelling Procedures

Details the safe process for refuelling the machine, including safety warnings.

Machine Instability and Hydraulic Overpressure

Addresses machine instability and hydraulic circuit overpressure.

Emergency Operations: Towing and Jump Start

Towing the Machine

Provides instructions for safely towing a locked machine for short distances.

Jump Starting the Engine

Explains how to safely jump-start the machine's engine using booster cables.

Maintenance Safety and Engine Cover Access

Safety Status for Maintenance

Defines the required 'safety state' before performing maintenance.

Lifting Boom Safety Block

Details how to install the safety block for the lifting boom during maintenance.

Opening the Engine Cover

Provides instructions for safely opening the engine compartment cover.

Maintenance Schedules

Ordinary Maintenance Schedule

Outlines daily and weekly maintenance tasks for the machine.

Scheduled Maintenance Intervals

Details maintenance tasks required at specific hour or time intervals.

Machine Interventions: Checks

Cleaning and Tyre Pressure Checks

Explains how to clean the machine and check tyre inflation pressure.

Structural Integrity and Battery Check

Details checks for structural integrity, bolts, and battery condition.

Hydraulic System Maintenance

Hydraulic Oil Level Check

Provides instructions for checking and topping up the hydraulic oil level.

Hydraulic Oil Filter Change

Step-by-step guide for replacing the hydraulic oil filter.

Hydraulic Oil Change and Greasing

Hydraulic Oil Change Procedure

Details the process for draining and refilling the hydraulic oil.

Greasing Points and Lubrication

Locates greasing points and specifies the type of grease to use.

Engine Maintenance Procedures

Engine Oil Level Check

Explains how to check and maintain the engine oil level.

Air Filter Check and Troubleshooting

Air Filter Inspection and Cleaning

Provides instructions for checking, cleaning, or replacing the air filter.

Troubleshooting Common Issues

Lists problems, their causes, and solutions for engine and movement issues.

Spare Parts and Filter Codes

Filter Codes

Provides model numbers for oil, air, and hydraulic filters.

Annex: Tyres Pressure Information

Warranty Terms and Conditions

General Warranty Rules

Outlines warranty duration and MultiOne SRL's repair policy.

Exclusions from Warranty

Lists items and conditions not covered by the machine's warranty.

Warranty Expiration and Notes

Warranty Expiration Conditions

Details conditions that invalidate the machine's warranty.

Important Warranty Notes

Covers safety device removal impact and liability for defects.

Related product manuals