EasyManua.ls Logo

Multiplex WELBILT Blend-In-Cup MB-8-1PP6 - Blender Wash and Blender Sanitizing Procedures

Multiplex WELBILT Blend-In-Cup MB-8-1PP6
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50 Part Number 9294844 April 6, 2023
Maintenance Section 4
Blender Wash
n
Warning- Risk of Injury to Persons- Moving Parts
Blend chambers contain fast-moving, sharp blender
blades. Never put hands or other body parts into the
blend chamber while blender blades are operating.
Never open the blender door and remove the cup until
the blender shaft has completely stopped blending and
blender shaft has moved out of the cup.
1. Place blue cleaning cup with wash solution in blend
chamber(s) and close the blender door(s).
Use approved mild dish detergent solution.
2. Press the Green Check to begin.
The blenders will lower into the wash solution and spin to
clean. WASHING will display on the screen.
Follow the on screen instruction, when prompted remove
the blue cup(s) and pour wash solution down the drain.
Close the blender door(s) and RINSING will display on the
screen while the machine rinses the blenders.
FINISHED will display on the screen then progress to the
Blender Sanitizing screen.
Blender Sanitizing
n
Warning- Risk of Injury to Persons- Moving Parts
Blend chambers contain fast-moving, sharp blender
blades. Never put hands or other body parts into the
blend chamber while blender blades are operating.
Never open the blender door and remove the cup until
the blender shaft has completely stopped blending and
blender shaft has moved out of the cup.
1. Place red sanitizing cup(s) with sanitizing solution in
blender station(s) and close the blender door(s).
Use approved sanitizer solution.
2. Press the Green Check to begin.
The blenders will lower into the wash solution and spin to
sanitize. SANITIZE will display on the screen.
Follow the on screen instruction, when prompted remove
the red cup(s) and pour sanitizing solution down the drain.
Close the blender door(s).
FINISHED will display on the screen then progress to the
Blender Station Sanitizing screen.

Table of Contents

Related product manuals