70 Part Number 9294844 April 6, 2023
Maintenance Section 4
Prepare Cleaning Solutions
Follow the on-screen instructions:
1. Put on gloves and safety glasses.*
2. Fill wash bucket with water and add detergent.
3. Fill rinse bucket with water.
4. Fill sanitizer bucket with water and add sanitizer.
• Press the Down Arrow to continue.
Washing Instructions
1. Remove grate from center dispensing area.
2. Install splash guard in dispense area.
3. Remove product holders from cabinet.
• Press the down arrow to continue.
4. Take product holders to refrigerated storage.
5. Spray and wipe each BIB connector and area with
cleaner.
6. Spray and wipe each BIB connector and area with
sanitizer.
7. Connect a cleaning hose to each product nozzle.
• Press the down arrow to continue.
8. Place cleaning manifold in wash bucket.
9. Press the Green Check to go to the next screen.
Select Slots to Flush
A. Touch each slot that needs to be flushed, select any
or all slots. Selected slots will become highlighted
in green and say NEEDS CLEANING.
• Slots that are not selected will say CLEAN.
• Slots outlined in red do not currently have a product
assigned but may be selected to flush.
A
B
B. The Green Check will appear once a slot has been
selected. Once all the slots to be flushed have been
selected, press the Green Check to continue.
This will automatically send the wash solution through each
line (slot) that was selected, displaying the progress on the
screen, 30 seconds per slot.
When washing has completed, the Rinsing Instructions
screen will appear automatically.
To Next Page
Loading...
